800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. * chromatic dispersion and additional losses should be taken into account optical wavelength fiber output receiver loss conn 865 1310 1550 type mode suffix type power sensitivity budget range* type ? led mm l0 50 /125 -16 dbm -31 dbm 15 db 2 km st ? 62.5/125 ? led mm l1 50 /125 -16 dbm -31 dbm 15 db 12 km st ? 62.5/125 ? eled sm l2e 09/125 -16 dbm -31 dbm 15 db 25 km fc ? laser sm l2 09/125 -14 dbm -34 dbm 20 db 32 km fc ? laser sm l3 09/125 -1 dbm -39 dbm 38 db 45 km fc 10 mbps fiber optic ethernet transceiver the DS-105TR is a fiber optic ethernet transceiver. it is compatible with a vast array of lan devices, and supports ieee 802.3 foirl protocol. data rates of up to 10mbps are supported. the DS-105TR allows users to attach ethernet segments together, or to connect an ethernet transceiver to a workstation. distances of up to 2 km can be achieved without a bridge, and up to 75 km with a bridge. system design the DS-105TR is equipped with six led status indicators to assist in troubleshooting and operation. there are indicators for pwr, podis, ltf, op, tp, and lmon (link monitor). the DS-105TR can be directly attached to workstations, bridges, repeaters, and terminal repeaters via a rj-45 connector. the DS-105TR has many computer to lan applications, or any ethernet solution. these units come in a stand alone or wall- mount version. the DS-105TR is powered by an external 12v dc power supply. it is also available in 1 single fiber strand. features ? ethernet fiber optic 10mbps basefl, 10base2, 10base5 transceiver ? multimode or singlemode operation over 2 fibers ? 2 km range ? up to 45 km with bridge ? supports ethernet ieee 802.3, foirl protocol ? six detailed led status indicators ? no emi or rfi and no ground loops ? stand alone or wall mount DS-105TR 10baset ethernet transceiver opticomm reserves the right to change specifications without notice
made in the usa data (ethernet/serial/usb) data data rate up to 10 mbps connector type rj-45 utp7 interface ethernet ieee 802.3 foirl bit error rate 10e -9 general dimensions & weight 2.5? l x 4.0? w x 0.75? h 4.5 oz operating temperature -20 c to +70 c storage temperature -30 c to +85 c humidity 0 to 95% non-condensing operating voltage 12 v dc @ 300 ma, and +15/-48 v dc 24 @ 150ma (optional) vibration up to 5 g's shock up to 12 g's diagnostics status monitoring six led indicators for pwr, podis, ltf, op, tp and lmon tests local loopback sample configuration optiva ? configurable communication platform network management sdi & hd-sdi composite video, audio & data rgb/vga/dvi audio/fsk/intercom data (ethernet/serial/usb) catv/rf & l-band optical switching, routing & redundancy passive multiplexing solutions enclosures, racks & frames power supplies & accessories
|